Due to the pre-cast nature of our pools, modifications such as increasing or decreasing size is not possible.
Every Plungie's external shell height is 1.69m, which makes the typical water depth 1.5m.
The internal finish of the pool is ecoFINISH, which is a highly engineered form of powder coating.
Coping tiles can easily be added to the pool, however, we don't sell them directly.
Yes, the Plungie can be tiled internally or externally. We don't offer tiling directly however, we can deduct $1500 from the pool price and provide a blank shell with no internal ecoFINISH. Either you or your builder/installer/tiler can then tile it for you to make your Plungie unique.
Every Plungie is made from completely concrete.
Read more about concrete vs fibreglass here +
Every Plungie comes with the pre-plumbed provisions for heating, however, the heater itself is an additional purchase.
See more about our heaters here +
Every Plungie can use an electric heat pump (we can supply you with this), gas heater or solar heating.
We don;t offer in-floor cleaning as an option. The best thing for a Plungie is a robotic cleaner that can be purchased through Poolwerx or another supplier directly.
If you're wanting any upgrades outside of the standard equipment package we offer through Poolwerx, the best thing to do is speak with Poolwerx or another supplier directly.
Due to the pre-cast nature of our pools, modifications such as windows are not possible. We only do windows for commercial activations and installations.
The advertised price is for the pool only, as installation costs are always site and project-specific.
Additional costs that are always site and project-specific include crane hire, earthworks, equipment, and finishings.
Crane costs are always site and project-specific and will need to be quoted and managed by an external crane company. The freight costs ensure your Plungie is delivered to your specified address on a flatbed or semi-truck. If access is not available for a flatbed or semi-truck, additional costs may be incurred.
Evert Plungie is supplied with a skimmer box, multi-coloured LED light, hydrostatic valve, and the internal ecoFINISH. Equipment such as the pump, filter, and chlorinator are separate from the pricing advertised on our pools.
We offer an optional equipment package through Poolwerx +
Crane costs vary depending on the access available on site. We recommend engaging a local crane company to conduct a site visit and quote.
We are the manufacturer and supplier only - the installation is organised by yourself through a local builder, pool builder, or structural landscaper; depending on your location. In some states and territories, you can even do it yourself as an owner-builder.
Find out more about our process here +
Yes, a pre-engineered concrete slab is required as the base footing for every Plungie to sit on top of.
Yes, the Plungie can be installed fully above-ground, fully in-ground, semi-recessed, or even on a rooftop.
Certification/council approval is required for any pool in Australia. Documentation differs from state to state and we will provide the required documentation. This can be put through the council directly or through a private certifier.
Certification/council approval is taken care of by your installer or yourself as an owner-builder.
As the supplier, we don't conduct site-visits. If we have an installation partner in your area, you can liaise with them for a site visit.
The crane company will need the dimensions and weight of the pool and the location of the lifting points. These are specified in our lifting diagrams:
Arena Lifting Diagram +
Studio Lifting Diagram +
Original Lifting Diagram +
Max Lifting Diagram +
Fencing regulations differ from state to state. In most states, complete fencing s required if the pool is below 1.2m. We recommend contacting your local council for the specific regulations in your area.
The pool can be installed alongside the boundary fence if the fence complies with 'splash and climb proof' regulations. Splash and climb proof regulations require the fence is at least 1.8m high, not climbable from the outside, and restricts the splash of water through the fence.
The Plungie is perfect for any site, including sloping blocks.
Yes, the pool can be used to retain earth.
Yes, slab requirements differ based on the soil type, but a Plungie is a perfect solution for sandy soil. We have pre-engineered specifications that will detail the requirements.
We recommend engaging a qualified tradesperson to assess, give approval, and conduct the works if you'd like to attach glass fencing to the side of the pool. The walls of the Plungie are only 90mm thick, so penetrations must not exceed 50mm from the top or 35mm from the sides. If works are carried out incorrectly, this will void the ten-year structural warranty.
The Plungie is not designed to be weight-bearing. Direct fixing of structural members will void the ten-year structural warranty.
We don't have a showroom, but there are a number of Plungies on display throughout Australia.
See our display locations here +
A ten-year structural warranty comes with every Plungie.
Robotic cleaners can be purchased separately through Poolwerx or another supplier.
Pool covers can be purchased separately through Poolwerx or another supplier.
Ladders can be purchased separately through Poolwerx or another supplier.
Yes, we currently offer a spa jet package for $3,000 inc GST.
See more about the spa jet package here +
We currently do not offer swim jets.